Download Stock Firmware Flash File for Tecno Pop 1s Pro:
Official Stock Firmware Flash File Now available for the Tecno Pop 1s Pro & You can download it from below. by using this firmware you can solve all software Issues on your Tecno Pop 1s Pro such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Tecno Pop 1s Pro Run on Android 7.0 and it is Powered by Mediatek MT6739 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, bluetooth & 3G.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of board software
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Tecno Pop 1s Pro
Type: Full ROM
Size: up to 1.3GB
SoC: Mediatek MT6739
Os: Android
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Tecno_Pop_1S_Pro_MT6739_V63_180711
Download Links:
How to Install Stock Firmware on Tecno Pop 1s Pro:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to PC by Pressing volume up & down key.
- You can see the Flashing Process on screen. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
have any issue, Let me know via comment