Download Stock Firmware for Vivo Y20G:
Official Stock Firmware Flash File Now available for the Vivo Y20G & You can download it from below. by using this firmware you can solve all software issues with in your Vivo Y20G such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Vivo Y20G Run on Android 10 and it is Powered by Mediatek helio G80 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI and Bluetooth 3G & 4G. the device come with 6GB of RAM and 128GB of Storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s:
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Vivo Y20G
Type: Full ROM
Size: up to 4GB
SoC: Mediatek helio G80
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: PD2066F_EX_A_1.75.14_vivo_mtk_alps-release-r0.mp1-pre4.1
Download Links:
EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)
- PD2066F_EX_A_1.75.14: Download
OTA Updates:
to upgrade a working phone (first check Installed firmware version with in your Phone)
- PD2066F_EX_A_1.75.7 Full OTA IN: Download
How to Install Stock Firmware on Vivo Y20G:
- Extract downloaded Stock firmware file.
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & connect Your switched off Phone by pressing volume up & down key.
- You can see Flashing Process on screen. after complete unplug & switch it ON
Read also:
have any issue, Let me know via comment