How to Reboot Xiaomi Poco X2 to Recovery, Fastboot & EDL Mod:
Step by Step Guide to Boot Xiaomi Poco X2 to Recovery,fastboot & EDL Mod, if You own a Poco X2 Smartphone and Want to boot it in Recovery Fastboot & EDL Mod then You Can do it by Following the below Instructions.
The Xiaomi Poco X2 Run on android 10 & it is Powered by QCOM SD 730 Processor. it is a Dual SIM Smartphone Support Nano GSM SIM Card, Connectivity Option’s Include 3G 4G, GPS, Wi Fi, Bluetooth etc, Sensor include Goryo Proximity Gravity etc.
The device Come with 6GB of RAM and 64GB Storage Can be Expandable via SD Card. in Camera Department it come with 64+8+2+2MP Rear Camera With 20MP Front Shooter.
Reboot Poco X2 to Recovery Mod:
Steps:
- Switch Off Phone.
- Once off together Press the Power and volume up button.
- once the Device Logo appear Release the Button.
- After This Simply Wait for the time till Your device boots into the Recovery Mode.
Reboot to Recovery using adb.
- Enable Usb debugging
- Connect Phone to PC with usb
- open CMD on Platform tool Folder
- type this code and hit enter:
adb reboot recovery
How to Reboot Poco X2 to Fastboot Mod:
Steps:
- Switch Off Phone.
- Once off, together Press the Power and Volume down button.
- This Will turn the Device on and You need to hold both the buttons till the Device logo Disappears.
- After this, Simply Wait for the time till your device boots into the Fastboot Mode.
Reboot to bootloader using adb.
- Enable usb debugging
- Connect Phone to PC with usb
- open cmd on adb folder
- type This code and hit enter:
adb reboot bootloader
How to Boot Poco X2 to EDL 9008 Mod:
Method 1:
- Enable usb Debugging
- Connect Phone to PC
- Send The command Via adb
adb reboot edl
Method 2:
- Install QD Loader Driver on PC
- Remove back Cover of Phone
- Find out The Pinout as Show In Image
- Connect Phone to PC with usb Cable
- take a Coper Wire and Short that Pinout
Method 3: