Yuho Vast 2 Flash File Firmware Free

Download Stock Firmware/Flash File For Yuho Vast 2:

Official Stock Firmware Flash File have now been available for the Yuho Vast 2 & You can download it From Below. The Firmware come in .cpb Format & flashable only with YGDP tool. you can use this firmware to unbrick your phone, to fix frp with in device.

Yuho Vast 2 Run on Android 8.1 & it is Powered by  Mediatek Processor. it is a dual SIM smartphone Support Nano GSM SIM card, connectivity Option’s Include 3G GPS, Wi Fi, Bluetooth etc. Sensor Include Goryo Proximity Gravity etc.

Why We Need Stock Firmware?

  • to Downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Note:

  • it will erase all user data
  • charge the device to prevent accidental shut down
  • Wrong flashing may brick your phone, Please Read Instructions carefully

Pre-Requirement’s

  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process
Must Require:

Firmware Information:

Device Name: Yuho Vast 2
Type: Full ROM
Size: up to 1.1GB
SoC: Mediatek
Os: Android
Password: rajud
Root access: Not
Gapps: Included
Firmware Version: Vast2_8.0.007.P1.190228.Vast2.RWTX_UCT_Vast2_OE.NOEFUSE

Download Links:

Firmware/ Flash File:

Flash Tools:

  • QIKU/YGDP: Download
  • ID for tools: Username=admin Pass=123456

USB Driver: 

How to Install Stock Firmware Flash Yuho Vast 2:

  • Download and Extract ROM File and Flash tools.
  • Run YGDP tools and Click Config.
  • Locate .cpb ROM File.. Click Start upgrade

  • as soon as connect Your switched off Phone to computer by together Pressing Volume up and down button
  • Make Sure all Drivers are Installed otherwise it will not work, once done disconnect device and switch it on..
Read also:

have any question Let Me Know via Comment.