Download Stock Firmware Flash File for Vivo Y75 5G:
Official Stock Firmware Now available for the Vivo Y75 5G & You can download it from below. by using this firmware you can solve all software Issues with in your Vivo Y75 5G such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Vivo Y75 5G Run on Android 11 and it is Powered by Mediatek MT6833 Processor. it is a dual SIM smartphone Support nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 8GB of RAM and 128GB of Storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- disable auth by following this Guide Win / Linux (optional if any error)
- The firmware is for Repairing purpose only, You have to manage risk accordingly
- downgrade via flash tools work’s on Most of devices but I don’t know about this device
- a customized MTK DA file is Require to bypass ‘Download agent Authentication‘ you can Search our site for custom DA file
Firmware Information:
Device Name: Vivo Y75 5G
Type: Full ROM
Size: up to 6GB
SoC: Mediatek MT6833
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: PD2166F_EX_A_3.9.18_vivo_mtk_alps-release-s0-pre9
Download Links:
EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)
- PD2166F_EX_A_3.9.23 Scatter: Download
OTA Updates:
to upgrade a working phone (first check Installed firmware version with in your Phone)
- PD2166F_EX_A_1.11.6 Full OTA: Download
How to Install Stock Firmware on Vivo Y75 5G:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- disable SLA auth by following this Guide Win / Linux
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- Repeat Process and load DA & Auth file too
- on SP flash tool Setup Connection Like below Images
- Click Options > Options > connection and make the settings as in the screenshot (UART connection mode)
- select Download only. Click Download
- connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
Read also:
have any issue, Let me know via comment