Download Tecno Spark 3 Pro Official Android 10 Firmware:
official Android 10 Firmware Now available for the Tecno Spark 3 Pro & You can Download it from below. The Firmware come in Scatter Format & you can Flash it with SP Flash tool or Tecno Flash tools.
Tecno Spark 3 Pro Run on android 9.0 & it is Powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone that Support Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G. The device come with 3GB of RAM and 32GB of Storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Tecno Spark 3 Pro
Type: Full ROM
Size: up to 2GB
SoC: Mediatek MT6761
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: KB8-H624BNPQ-Q-191121V669
Downloads:
How to Install Stock Firmware on Tecno Spark 3 Pro:
- Extract Downloaded Official Stock ROM..
- Install Mediatek Vcom Driver on Your PC.
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On