Download Tecno Pop 6 BE7 Flash File (Stock ROM):
Official Stock Firmware Now available for the Tecno Pop 6 BE7 & You can download it from below. by using this firmware you can solve all software Issues with in your Tecno Pop 6 BE7 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Tecno Pop 6 BE7 Run on Android 11 and it is Powered by Mediatek MT6739 Processor. it is a dual SIM smartphone support nano SIM card, connectivity features Include hotspot, GPS, WIFI and bluetooth. the device come with 4GB of RAM and 64GB storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
Note:
- flash at own risk
- (optional) disable auth by following this Guide
Firmware Information: |
|
---|---|
Device Name | Tecno Pop 6 BE7 |
ROM Type | Full ROM |
SoC | Mediatek MT6739 |
OS | Android 11 |
Password | Null |
Gapps | Included |
Root Access | No |
Region | GLO |
Firmware Version | BE7-V470AEA-RGo-OP-220413V532 |
Download Links:
- VCOM Driver: Download
- SP Flash tool V5.2 Download
- ROM2box (both SP Flash tool & disable auth option): Download
Available Firmware for Tecno Pop 6 BE7:
- BE7-V470AEA-RGo-OP-220413V532: Download
How to Install Stock Firmware on Tecno Pop 6 BE7:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- Select ‘Download only’
- Click ‘Download’
- connect Your switched off Phone to computer by using usb cable (press Volume up and down key+ Insert usb) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
Note: if you will face any flashing error first disable auth using this tool and then flash
Read also:
have any issue, Let me know via comment