Tecno KC6 Flash File Firmware MT6761 9.0

Download Stock Firmware Flash File for Tecno KC6:

Latest Firmware Flash File Now available for the Tecno KC6 & You can Download it From Below. The Firmware come in Scatter format Which Can be Flash either with SP Flash tool or Miracle box. You can use it to unbrick Your device.

Tecno KC6 Run on Android 9.0 & it is Powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone that Support Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G.

Must Require:

Why We Need Stock Firmware?

  • to Downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s

  • backup Your NVRAM using this Guide
  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Tecno KC6
Type: Full ROM
Size: up to 2GB
SoC: Mediatek MT6761
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: KC6-H6114IJK-P-200316V197

Download Links:

File Name Version Downloads
VCOM Driver N/A Download
SP Flash tools V5.2020 Download
Firmware/ Flash File KC6-H6114IJK-P-200316V197 Download

How to Install Stock Firmware on Tecno KC6:

  • Extract Downloaded Official Stock ROM..
  • Install Mediatek Vcom Driver on Your PC.
  • Download & Extract SP Flash tools, Run SP Flash tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download OnlyClick Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it ON

How to Flash using Tecno Flash tools

  • Download & Extract Firmware
  • Download & Extract tecno flash tool
  • Install Mediatek VCOM driver on Computer
  • open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
  • click on grey ‘Settings icon’ on the top-Left corner of the screen.
  • In the Popup Click load & Select  MT6XX_Android_scatter.txt File From Firmware Folder
  • Connect Your Switched of phone to Computer by Pressing volume up & down Key
  • Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar

  • Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it on.

Read also:

have any question Let Me Know via comment.