How to Install Stock Firmware on Teclast A10H M3T3

Download Stock Firmware for Teclast A10H:

Official Stock Firmware Flash File Now available for the Teclast A10H & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box.

Teclast A10H Run on Android 7.0 and it is Powered by Mediatek MT8163 Processor. connectivity options Include, hotspot, WIFI, GPS & Bluetooth. The device come with 2GB of RAM and 16GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of Board Software

Pre-Requirement’s

  • backup NVRAM using this Guide
  • First Make a complete backup of Your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Teclast A10H
Type: Full ROM
Size: up to 659MB
SoC: Mediatek MT8163
Os: Android 7.0
Password: Null
Root access: Not
Gapps: unknown
Firmware Version: A10H-M3T3-Android7.0-V1.03_20181107

Download Links:

File Name Version Downloads
VCOM Driver N/A Download
SP Flash tools V5.2 Download
Firmware/ Flash File A10H-M3T3-Android7.0-V1.03_20181107 Download

How to Install Stock Firmware on Teclast A10H:

  • Extract downloaded stock firmware..
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & Connect Your switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:

have any issue, Let me know via comment