How to Install Stock Firmware on Leagoo Leapad 10s

Download Stock Firmware Flash File for Leagoo Leapad 10s:

Latest Firmware Flash File Now available for the Leagoo Leapad 10s & You can Download it From Below. The Firmware come in Scatter format Which Can be Flash either with SP Flash tool or Miracle box. You can use it to unbrick Your device.

Leagoo Leapad 10s Run on Android 7.0 & it is Powered by Mediatek MT6737 Processor. it is a Dual SIM (GSM) Smartphone that Support Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G.

Must Require:

Why We Need Stock Firmware?

  • to Downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s

  • backup Your NVRAM using this Guide
  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Leagoo Leapad 10s
Type: Full ROM
Size: up to 932MB
SoC: Mediatek MT6737
Os: Android 7.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: V1.1G_1+16_v1.5_2020-01-11-17-55

Download Links:

File Name Version Downloads
VCOM Driver N/A Download
SP Flash tools V5.2020 Download
Firmware/ Flash File V1.1G_1+16_V1.5_2020-01-11-17-55 Download

How to Install Stock Firmware on Leagoo Leapad 10s:

  • Extract Downloaded Official Stock ROM..
  • Install Mediatek Vcom Driver on Your PC.
  • Download & Extract SP Flash tools, Run SP Flash tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download OnlyClick Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.