Download A750FNXXU1BSC4 Pie update for Samsung SM-A750FN:
Download & Install Official Android 9.0 Pie update on Samsung SM-A750FN, Here we Share latest A750FNXXU1BSC4 Firmware update for Samsung SM-A750FN Which Will update Your Phone to Latest Android 9.0 OS, A750FNXXU1BSC4 update for Samsung SM-A750FN available via OTA You Can Check it on Settings/about_Phone/update Section, If You have not yet Receive then you can Manually update it by Following the Below Instructions.
Samsung SM-A750FN Run on android 8.1 OS Which is Powered by a Exynos 7885 Processor. it is a Dual SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options Include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G and 4G.
Samsung SM-A750FN Come with 4GB of RAM and 64GB of Storage can be expandable via SD card. it has triple Rear Camera Including 25MP Primary Sensor 8MP Wide angle Sensor and a 5MP Depth Sensor.
Note-
1. Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:
1. backup NVRAM
2. Create a nandroid backup
3. backup Your Personal data
Firmware information:
Product name:Samsung SM-A750FN
Type: Full ROM
Size: 2GB
SoC: Exynos 7885
Os: Android 9.0
Password: Null
Root access: Not
Gapps: unknown
Regions: Russia, italy, Germany, hungry, Switzerland,
PDA: A750FNXXU1BSC4 for Italy May be different on other Region Check on Download Page
Download :
- Firmware For Listed Regions: Download
Flash Tools:
- odin Here
Driver:
- Driver Here
How to Install Android 9.0 Pie on on Samsung SM-J415G:
1) Download tools and Combination ROM From above. Then Extract odin and ROM File.
2) Install Samsung Driver on PC. Run Odin.exe From tool Folder.
3) Now Reboot Phone to Download Mod and Connect to PC with usb
4) You can see added msg. Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“ Make sure re-partition is Not checked.
5) Now Extract & Load Full Firmware under AP, BL, CP and HOME_CSC Section and Click Start/Download
6 ) Wait For Success/ Done.
have any issue Here is the Detailed Guide With images.
Read also:
So this is a Complete Guide to Download Firmware and Flash This Device. if You have any question Let Me Know via Comment.