Download Xiaomi Redmi Note 9 ENG/ Engineering ROM:
official Engineering ROM have Now been available for Xiaomi Redmi Note 9 and You can download it from below. by using this firmware you can solve all Network Related Issues with in your Xiaomi Redmi Note 9 such as No Network, IMEI loss etc.
Xiaomi Redmi Note 9 Run on Android 10 & it is Powered by Mediatek Processor. it is a dual SIM smartphone support Nano GSM SIM card, connectivity option’s Include GPS, hotspot, WIFI, bluetooth 3G & 4G. sensor Include Gyroscope Proximity Gravity fingerprint etc. The device come with 4/6GB of RAM and 64/128GB storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- The firmware is for Repairing purpose only, You have to manage risk accordingly
- downgrade via flash tools work’s on Most of devices but I don’t know about this device
Download Links:
ENG Firmware’s=
- merlin ENG ROM by VD171 (pass= VD171): Download
How to Install ENG Firmware on Redmi Note 9:
- unpack downloaded Firmware using 7zip or winrar
- Install Mediatek Vcom driver on Your computer.
- disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too
- Select Download only.
- Click Download & Connect Your switched off Phone by pressing volume up and down key (if no usb device then you have to do test point)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Flash using ROM2box (No Auth & Easy):
- Install MTK and USBDK driver on your computer
- Run ROM2box.exe
- Go to Mediatek/Firmware Flasher ‘ Select Firmware folder & Click Flash’
- Once the process Started, turn Phone OFF, Now together Press Volume up + down key & then Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
Note=
- don’t connect phone before process start
- if any issue with img format rename all files from .img to .bin that’s all you need to do..
Read also:
have any issue, Let me know via comment