Redmi 9 India ENG/ Engineering ROM Free Download

Download Xiaomi Redmi 9 India (Cattail) ENG/ Engineering ROM:

official Engineering ROM Now available for Redmi 9 India and You can download it from below. by using this firmware you can solve all Network Related Issues with in your Redmi 9 India such as No Network, IMEI loss etc.

Redmi 9 India Run on Android 10 & it is Powered by Mediatek MT6765 Processor. it is a dual SIM smartphone support Nano GSM SIM card, connectivity option’s Include GPS, hotspot, WIFI, bluetooth 3G & 4G, sensor Include Gyroscope Proximity Gravity fingerprint etc. The device come with 4GB of RAM and 64GB storage that can be expandable via SD card.

Note:

  • Must Make a backup of Your ROM and Personal data.
  • it will erase all your data Include Personal information.
  • Make sure your Phone have at least 40-50% charge to Prevent accidental shut down.
Must Require:

Firmware Information:

Device Name: Redmi 9 India
Type: Full ROM
ROM Size: up to 896MB
SoC: Mediatek MT6765
OS: Android
Password: Null
Root access: Not
Gapps: Included
Firmware Version: N/A

Downloads Links:

Flash Tools:

usb driver: 

How to Install ENG Firmware on Redmi 9 India:

  • First disable SLA Authentication by following this Guide (if not disabled you will get a BROM error or MI flash tool Require a authorized Mi account)
  • Extract downloaded stock firmware..
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download only. Click Download & Connect Your switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & switch it on

How to Flash ENG ROM on Redmi 9 India Via Mi Flash tool:

  • Download and Install usb driver on computer
  • Download Extract & Install MI Flash
  • Now Run MI Flash Click Refresh
  • select extracted Fastboot ROM folder
  • Reboot Phone to bootloader (or EDL Mod) and connect it to computer
  • Click Start and wait until success. once done, disconnect device & switch it ON

Read also: