Download Stock Firmware Flash File For Redmi 11 Prime 5G:
Official stock firmware Now available for Redmi 11 Prime 5G and you can download it from below. by using this firmware you can solve all software Issues on your Redmi 11 Prime 5G such as hang on Logo, frp lock, Fastboot Mode, display Blank or White after flash, dead recovery, dead after flash etc.
Redmi 11 Prime 5G Run on Android 12 & it is Powered by Mediatek MT6833 Processor. it is a dual SIM smartphone support Nano GSM SIM cards, connectivity Option’s Include 3G 4G 5G GPS, WIFI, bluetooth etc, sensor Include Gyro, Proximity Gravity etc. the device come with 4/6GB of RAM and 64/128GB of storage that can be expandable via SD card.
Note:
- Must Make a backup before process
- it will erase all your data Including Internal storage
Firmware Information: |
|
---|---|
Device Name | Redmi 11 Prime 5G |
ROM Type | Full ROM |
SoC | Mediatek |
OS | Android 12 |
Password | Null |
Root Access | No |
Region | check below list |
Firmware Version | V13.0.7.0.SLSCNXM |
Download Links:
EDL ROM:
- V13.0.7.0.SLSCNXM | 12.0 CN: Download
- V13.0.2.0.SLSINXM | 12.0 IND: Download
- V13.0.6.0.SLSMIXM | 12.0 GLO: Download
Flash Tools:
- SP Flash tool: Download
- ROM2box Full Free: Download
- contact me Here for Mi Flash Auth, unbrick, Region Change & root (paid)
USB Driver:
- Mediatek USB Driver: Download
How to Flash Redmi 11 Prime 5G Via SP Flash tool:
- unpack downloaded Firmware using 7zip
- Now You have scatter firmware
- Install Mediatek Vcom driver on Your computer
- disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- set connection like below image (option/connection)
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too
- from drop down Select ‘Download only‘
- Click ‘Download’
- turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Read also: