In this page we share latest Engineering ROM for Redmi 10 5G, you can use this firmware to repair IMEI Number on your Xiaomi Redmi 10 5G smartphone. after flashing this ROM you have to wipe Modem partition then write back & restore QCN File..
Note:
- Make a backup before Process
Downloads Links:
- Redmi 10 5G (Light) GLO ENG ROM: Download
Flash Tools:
USB Driver:
- Mediatek USB Driver: Download
How to Flash ENG ROM Via SP Flash tool:
- unpack downloaded Firmware using 7zip
- Now You have scatter firmware
- Install Mediatek Vcom driver on Your computer
- disable SLA Authentication by following this Guide (if not disabled you will face a BROM error or flash tool require a authorized account/ID)
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- set connection like below image (option/connection)
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too
- from drop down Select ‘Download only‘
- Click ‘Download’
- turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Method 2:
- Install MTK & usbdk driver on your pc
- Run rom2box Go to Mediatek/firmware flasher & open dedicated GUI
- turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key
- In the popup go to partition manager and locate all Partition file one by one from ROM folder
- once Ready, Click ‘write partition‘
- once done, disconnect device, reconnect once charging started disconnect & Power ON
Read also: