Realme RMX3193 Firmware Flash File No Auth

Realme C25 RMX3193 Flash File Firmware Free Download:

official Stock Firmware Flash File Now available for the Realme RMX3193 & You can download it from below. by using this firmware you can solve all software Issues with in your Realme RMX3193 such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.

Realme RMX3193 Run on Android 10 & it is Powered by Mediatek helio G70 Processor. it is a dual SIM (GSM and GSM) smartphone support Nano-SIM cards. connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM 3G & 4G. The device come with 4GB of RAM and 64GB of Storage that can be expandable via SD card.

Note:

  • it will erase all Your Personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
  • Please do carefully, we are Not responsible for any damage to Your device.
  • ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:

Firmware Information:

Device Name: Realme RMX3193
Type: Full ROM
ROM Size: up to 4GB
SoC: Mediatek
OS: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: RMX3193_11_A.25_2021121719250000

Downloads Links:

EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)

Flash tools:

usb Driver: 

How to Install Stock Firmware on Realme RMX3193:

  • unpack downloaded firmware using this tool
  • Install Mediatek VCOM driver on Your computer
  • Disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download only. Click Download & Connect Your switched off Phone.

  • Flashing Process started. once done unplug device & switch it ON

Note: if there is no usb device, then check for usb driver or try test Point method

How to Flash/unbrick Realme RMX3193 Via Oppo Download tool:

  • Extract ROM File & Download tool in same Folder
  • Now Install correct driver on PC
  • connect Phone to PC with USB
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Fixes & Solutions:

if there was a flashing error untick below Listed Partition in SP flash tools

  • opporeserve2
  • cdt_engineering
  • md1mg
Related: