Realme Narzo 20 Pro RMX2161 Flash File Firmware (Stock ROM)

Download Stock Firmware Flash File For Realme Narzo 20 Pro RMX2161:

Official stock firmware Now available for Realme Narzo 20 Pro RMX2161 and you can download it from below. by using this firmware you can solve all software Issues on your Realme Narzo 20 Pro RMX2161 such as hang on Logo, frp lock, Fastboot Mode, display Blank or White after flash, dead recovery, dead after flash etc.

Note:

  • Must Make a backup before process
  • it will erase all your data Including Internal storage
Firmware Information:
Device Name Realme V5 RMX2112
ROM Type Full ROM + OTAs
SoC Mediatek
OS Android
Password Null
Root Access No
Region China
Firmware Version RMX2161_11_C.07_20210526

Download Links:

Available Firmware for Realme Narzo 20 Pro RMX2161:

Flash Tools:

USB Driver:

How to Flash Realme Narzo 20 Pro RMX2161 Via SP Flash tool:

  • unpack downloaded Firmware using 7zip
  • Now You have scatter firmware
  • Install Mediatek Vcom driver on Your computer
  • disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • set connection like below image (option/connection)

  • Go to Download tab Click Scatter and Load Scatter File from ROM folder
  • Repeat Process and load DA and Auth file too

  • from drop down Select ‘Download only‘
  • Click ‘Download’

  • turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
  • You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

Method 2 (No Auth):

  • Install MTK & usbdk driver on your pc
  • Run rom2box Go to Mediatek/firmware flasher & open dedicated GUI
  • connect phone in BROM Mod (you have to do test Point)
  • once Phone detected in tool go to partition manager and locate all Partition file one by one from ROM folder

  • once Ready, Click ‘write partition‘
  • once done, disconnect device, reconnect once charging started disconnect & Power ON
Read also: