Realme Q3 Pro RMX2205 Firmware Flash File (Stock ROM)

Realme Q3 Pro RMX2205 Flash File Firmware Free Download:

official Stock Firmware Flash File Now available for the Realme Q3 Pro & You can download it from below. by using this firmware you can solve all software Issues with in your Realme Q3 Pro such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.

Realme Q3 Pro Run on Android 11 & it is Powered by Mediatek Dimensity 1100 Processor. it is a dual SIM (GSM and GSM) smartphone support Nano-SIM cards. connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM 3G 4G & 5G. The device come with 6GB of RAM and 128GB of Storage that can be expandable via SD card.

Note:

  • it will erase all Your Personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
  • Please do carefully, we are Not responsible for any damage to Your device.
  • ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:

Firmware Information:

Device Name: Realme Q3 Pro 5G
Type: Full ROM
ROM Size: up to 4.89GB
SoC: Mediatek
OS: Android 11
Password: RMX2205s
Gapps: Included
Root access: Not
Firmware Version: RMX2205domestic_11_A.15_2021092617060287

Downloads Links:

EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)

  • RMX2205domestic_11_A.15_2021092617060287: Download

OTA Updates:
to upgrade a working phone (first check Installed firmware version with in your Phone)

  • RMX2205domestic_11_A.15_2021092617060287: Download

Flash tools:

usb Driver: 

How to Install Stock Firmware on Realme Q3 Pro:

  • unpack downloaded Firmware using this tool
  • Install Mediatek VCOM driver on Your computer
  • then disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download only. Click Download & Connect Your switched off Phone.

  • Flashing Process started. once done unplug device & switch it ON

Note: if there is no usb device, then check for usb driver or try test Point method

How to Flash/unbrick Realme Q3 Pro Via Oppo Download tool:

  • Extract ROM File & Download tool in same Folder
  • Now Install correct driver on PC
  • connect Phone to PC with USB
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Fixes & Solutions:

if there was a flashing error untick below Listed Partition in SP flash tools

  • opporeserve2
  • cdt_engineering
  • md1mg
Related: