Realme GT Neo Flash File Firmware Free Download:
official Stock Firmware Flash File Now available for the Realme GT Neo & You can download it from below. by using this firmware you can solve all software Issues with in your Realme GT Neo such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.
Realme GT Neo Run on Android 11 & it is Powered by Mediatek Dimensity 1200 Processor. it is a dual SIM (GSM and GSM) smartphone support Nano-SIM cards. connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM 3G & 4G. The device come with 8GB of RAM and 128GB of Storage that can be expandable via SD card.
Note:
- it will erase all Your Personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
- Please do carefully, we are Not responsible for any damage to Your device.
- ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:
Firmware Information:
Device Name: Realme GT Neo
Type: Full ROM
ROM Size: up to 4.9GB
SoC: Mediatek
OS: Android 11
Password: rmx3031S
Gapps: unknown
Root access: Not
Firmware Version: RMX3031_11_A.23_2021061205390144
Downloads Links:
EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)
OTA Updates:
to upgrade a working phone (first check Installed firmware version with in your Phone)
- RMX3031domestic_11_A.23_2021061205390144: Download
Flash tools:
usb Driver:
How to Install Stock Firmware on Realme GT Neo:
- unpack downloaded Firmware using this tool
- then disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Install Mediatek Vcom driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & switch it on
How to Flash/unbrick Realme GT Neo Via Oppo Download tool:
- Extract ROM File & Download tool in same Folder
- Now Install correct driver on PC
- connect Phone to PC with USB
- Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.
Related: