Realme 9 Pro Plus RMX3392 Firmware Flash File (Stock ROM)

Download Realme 9 Pro Plus RMX3392 Flash File Firmware Free:

official Stock Firmware Flash File Now available for the Realme 9 Pro Plus & You can download it from below. by using this firmware you can solve all software Issues with in your Realme 9 Pro Plus such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.

Realme 9 Pro Plus Run on Android & it is Powered by Mediatek Processor. it is a dual SIM (GSM and GSM) smartphone support Nano-SIM cards. connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM 3G 4G & 5G. The device come with 8GB of RAM and 128GB of Storage that can be expandable via SD card.

Note:

  • it will erase all Your Personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
  • Please do carefully, we are Not responsible for any damage to Your device.
  • ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:

Firmware Information:

Device Name: Realme 9 Pro Plus RMX3392
Type: Full ROM
ROM Size: up to 4-8GB
SoC: Mediatek
OS: Android
Password: Null
Gapps: Included
Root access: Not
Firmware Version: RMX3392_11_A.07_2022012601480000

Downloads Links:

ofp packages:

Flash tools:

usb Driver: 

How to Install Stock Firmware on Realme 9 Pro Plus:

  • unpack downloaded firmware using this tool
  • Install Mediatek VCOM driver on Your computer
  • Disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download only. Click Download & Connect Your switched off Phone.

  • Flashing Process started. once done unplug device & switch it ON

Note: if there is no usb device, then check for usb driver or try test Point method

How to Flash/unbrick Realme 9 Pro Plus Via Oppo Download tool:

  • Extract ROM File & Download tool in same Folder
  • Now Install correct driver on PC
  • connect Phone to PC with USB
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Fixes & Solutions:

if there was a flashing error untick below Listed Partition in SP flash tools

  • opporeserve2
  • cdt_engineering
  • md1mg
Related: