Realme 7 5G RMX2111 Flash File Firmware (Stock ROM)

RMX2111 Realme 7 5G Flash File Firmware Free Download:

official Stock Firmware Flash File Now available for the Realme 7 5G & You can download it from below. with the help of this firmware you can solve all software Issues on your Realme 7 5G such as hang Logo, frp lock, Fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc.

Note:

  • it will erase all your personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
  • Please do carefully, we are not responsible for any damage to Your device.
  • ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:

Firmware Information:

Device Name: Realme 7 5G
Type: Full ROM
ROM Size: up to 5.5GB
SoC: Mediatek Dimensity 800U
OS: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: RMX2111PU_11_A.33_210318

Downloads Links:

Firmware Files:

China:

  • RMX2111domestic_11_C.16_2022032912050186: Download

Flash Tools:

  • SP Flash tool: Download
  • ROM2box Full Free: Download
  • No Idea How to setup & flash contact me Here (Not free)

USB Driver:

How to Flash Realme V5 RMX2112 Via SP Flash tool:

  • unpack downloaded Firmware using 7zip
  • Now You have scatter firmware
  • Install Mediatek Vcom driver on Your computer
  • disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • set connection like below image (option/connection)

  • Go to Download tab Click Scatter and Load Scatter File from ROM folder
  • Repeat Process and load DA and Auth file too

  • from drop down Select ‘Download only
  • Click ‘Download’

  • turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
  • You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

Method 2 (No Auth):

  • Install MTK & usbdk driver on your pc
  • Run rom2box Go to Mediatek/firmware flasher & open dedicated GUI
  • connect phone in BROM Mod (you have to do test Point)
  • once Phone detected in tool go to partition manager and locate all Partition file one by one from ROM folder

  • once Ready, Click ‘write partition
  • once done, disconnect device, reconnect once charging started disconnect & Power ON
Read also: