POCO X4 Pro 5G Flash File Firmware (EDL ROM)

Download Stock Firmware/ Flash File For POCO X4 Pro 5G:

official Stock Firmware/ Flash File now available for Xiaomi POCO X4 Pro 5G and You can download it from below. by using this firmware you can solve all software Issues with in your Xiaomi POCO X4 Pro 5G such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Xiaomi POCO X4 Pro 5G Run on Android 11 & it is Powered by QCOM SD695 Processor. it is a dual SIM Smartphone support Nano SIM card, connectivity Option’s Include GPS, Wi-Fi, bluetooth and 4G. the device come with 6GB of RAM and 64GB storage that can be expandable via SD card.

Note:

  • Must make a backup of your device
  • it will erase all your data Include Personal Information
  • Make sure Your Phone have at least 40-50% charge to Prevent accidental shut down
Must Require:

Firmware Information:

Device Name: Xiaomi POCO X4 Pro 5G
Type: Full ROM
ROM Size: up to 3-6GB
SoC: QCOM SD695
Os: Android 11
Password: null
Gapps: Included Expect CN ROM
Root access: Not
Firmware version: Veux_Images_V13.0.2.0.RKCMIXM

Downloads Links:

EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)

  • V13.0.6.0.RKCEUXM | 11.0 EEA: Download
  • V13.0.5.0.RKCCNXM | 11.0 China: Download
  • V13.0.4.0.RKCINXM | 11.0 INDIA: Download
  • V13.0.2.0.RKCJPXM | 11.0 JAPAN: Download
  • V13.0.2.0.RKCRUXM | 11.0 Russia: Download
  • V13.0.2.0.RKCTRXM | 11.0 Turkey: Download
  • V13.0.3.0.RKCTWXM | 11.0 Taiwan: Download
  • V13.0.10.0.RKCMIXM | 11.0 Global: Download

Flash Tools:

  • MI Flash: Download
  • No Auth Firehose for Xiaomi Redmi Note 11 Pro 5G: N/A Yet

usb Driver: 

How to Flash Xiaomi POCO X4 Pro 5G Via MI Flash:

  • Download and Install Xiaomi usb driver on computer

  • Download Extract & Install MI Flash
  • Now Run MI Flash Click Refresh
  • Select Extracted fastboot ROM folder
  • Reboot Phone to Bootloader (or EDL Mod) and connect it to computer
  • Click Start and wait until success. once done, disconnect device & switch it ON

test Point Pinout For EDL Mod:

coming soon

Read also: