Download Stock Firmware Flash File For OPPO Reno2 Z CPH1951:
Official stock firmware Now available for OPPO Reno2 Z CPH1951 and you can download it from below. by using this firmware you can solve all software Issues on your OPPO Reno2 Z CPH1951 such as hang on Logo, frp lock, Fastboot Mode, display Blank or White after flash, dead recovery, dead after flash etc.
Note:
- Must Make a backup before process
- it will erase all your data Including Internal storage
Firmware Information: |
|
|---|---|
| Device Name | OPPO Reno2 Z CPH1951 |
| ROM Type | Full ROM + OTAs |
| SoC | Mediatek |
| OS | Android |
| Password | Null |
| Root Access | No |
| Region | check below List |
| Firmware Version | CPH1951_11_F.66_2022072716454757 |
Download Links:
GLOBAL:
- CPH1951_11_F.66_2022072716454757: Download
Flash Tools:
- SP Flash tool: Download
- ROM2box Full Free: Download
- No Idea How to setup & flash contact me Here (Not free)
USB Driver:
- Mediatek USB Driver: Download
How to Flash OPPO Reno2 Z CPH1951 Via SP Flash tool:
- unpack downloaded Firmware using 7zip
- Now You have scatter firmware
- Install Mediatek Vcom driver on Your computer
- disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- set connection like below image (option/connection)
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too
- from drop down Select ‘Download only‘
- Click ‘Download’
- turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Method 2 (No Auth):
- Install MTK & usbdk driver on your pc
- Run rom2box Go to Mediatek/firmware flasher & open dedicated GUI
- connect phone in BROM Mod (you have to do test Point)
- once Phone detected in tool go to partition manager and locate all Partition file one by one from ROM folder
- once Ready, Click ‘write partition‘
- once done, disconnect device, reconnect once charging started disconnect & Power ON
Read also: