Oppo Reno 8 Pro CPH2357 Firmware Flash File Free

Download Oppo Reno 8 Pro CPH2357 Flash File/ Stock ROM:

Official Stock Firmware Now available for the Oppo Reno 8 Pro & You can download it from below. by using this firmware you can solve all software Issues with in your Oppo Reno 8 Pro such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Oppo Reno 8 Pro Run on Android 12 & it is Powered by Mediatek dimesnity 8100 Processor. it is a dual SIM smartphone support nano SIM card, connectivity features Include hotspot, GPS, WIFI and bluetooth. the device come with 8GB of RAM and 256GB storage that can be expandable via SD card.


  • backup NVRAM using this guide
  • first make a complete backup of your device
  • backup internal storage (images Phots) to Pen drive or pc


  • flash at own risk
Firmware Information:
Device Name Oppo Reno 8 Pro CPH2357
ROM Type Full ROM
SoC Mediatek
OS Android 12
Password Null
Gapps Included
Root Access No
Firmware Version A.10

Download Links:

Available Firmware for Oppo Reno 8 Pro:

Note: unsupported cpu, mtk client or any other script does not support this cpu wait for a proper solution or if you have a authorized account you can flash it using ‘oppo MTK Download tool’

How to Flash on Oppo Reno 8 Pro using SP Flash tool:

  • unpack downloaded Firmware (ofp) using this tool
  • Install Mediatek VCOM driver on Your computer
  • disable SLA Authentication by using this tool (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract SP tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • set the connection like below image (option/connection)

  • Go to Download tab
  • Click chose and load scatter file from ROM folder

  • follow the same steps and locate ‘DA’ and ‘Auth file’ too
  • from drop down menu Select Download only’
  • Click Download’ button to start flashing

  • connect Your switched off Phone to computer by using usb cable (press Volume up and down key + Insert usb) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
  • flashing Process started
  • once done, unplug device & switch it ON, done
Read also:

have any issue, Let me know via comment