Oppo Reno 2Z PCKM80 Firmware Flash File (Stock ROM)

Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the firmware that is distributed with a device and can be used to restore it to its original state.

Oppo Reno 2Z PCKM80 Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. stock ROMs are often specific to a particular device and are not interchangeable between different devices.

Note:

• Must Make a backup before process
• it will erase all your data Including Internal storage

Download Links:

Available Firmware:

• PCKM80_11_F.12_2022021614385831: Download

Flash Tools:

• SP Flash tool: Download
• ROM2box Full Free: Download
• contact me Here for MSM Auth, unbrick, Region Change & root (paid)

USB Driver:

• Mediatek USB Driver: Download

How to Flash Oppo Reno 2Z PCKM80 Via SP Flash tool:

• unpack downloaded Firmware using 7zip
• Now You have scatter firmware
• Install Mediatek Vcom driver on Your computer
• disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
• Download & Extract smartphone flash tools on your computer
• from the flash tool folder Run flash_tool.exe

• set connection like below image (option/connection)

• Go to Download tab Click Scatter and Load Scatter File from ROM folder
• Repeat Process and load DA and Auth file too

• from drop down Select ‘Download only‘
• Click ‘Download’

• turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
• You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

Read also:

• How to Repair IMEI Number