Oppo K10 5G CPH2337 Flash File Firmware Free Download:
official Stock Firmware Flash File Now available for the Oppo K10 5G CPH2337 & You can download it from below. by using this firmware you can solve all software Issues with in your Oppo K10 5G CPH2337 such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.
Oppo K10 5G Run on Android 12 & it is Powered by Mediatek dimensity 800 Processor. it is a dual SIM (GSM and GSM) smartphone support Nano-SIM cards. connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM 3G and 4G. the device come with 3GB of RAM and 32GB of Storage that can be expandable via SD card.
Note:
- flash carefully, we are Not responsible for any damage to Your device
- a customized DA file is require to bypass Download agent authentication
- it will erase all Your Personal data Including Internal storage. so we advice you to first make a complete backup of your Phone
Firmware Information:
Device Name: Oppo K10 5G CPH2337
Type: Full ROM
ROM Size: up to 5-6GB
SoC: Mediatek
OS: Android 12
Password: Null
Gapps: Included
Root access: Not
Firmware Version: CPH2337_11_A.01_2022041922590200
Downloads Links:
EDL Firmware (For Flash tools):
- CPH2337export_11_A.01_2022041922590200: Download
- CPH2337export_11_A.05_2022081210030161: Download
- CPH2337export_11_A.07_2022092400470000: Download
Flash tools:
usb Driver:
How to Install Stock Firmware on Oppo K10 5G CPH2337:
- unpack downloaded Firmware using this tool
- Install Mediatek Vcom driver on Your computer.
- disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too
- Select Download only. Click Download & Connect Your switched off Phone by pressing volume up and down key (if no usb device then you have to do test point)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Related: