Oppo A91 CPH2001 Flash File Firmware Free Download:
official Stock Firmware Flash File Now available for the Oppo A91 CPH2001 & You can download it from below. with the help of this firmware you can solve all software Issues with in your Oppo A91 CPH2001 such as hang on Logo, frp lock, fastboot Mode, display Blank or White after Flash, dead recovery, dead after flash etc.
Note:
- it will erase all Your Personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
- Please do carefully, we are Not responsible for any damage to Your device.
- ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:
Firmware Information:
Device Name: Oppo A91 CPH2001
Type: Full ROM
ROM Size: up to 2-8GB
SoC: Mediatek
OS: Android
Password: Null
Gapps: Included
Root access: Not
Firmware Version: CPH2001_11_F.66_2022021320021648
Downloads Links:
EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)
Flash Tools:
USB Driver:
- Mediatek USB Driver: Download
How to Flash Oppo A91 CPH2001 Via SP Flash tool:
- unpack downloaded Firmware using 7zip
- Now You have scatter firmware
- Install Mediatek Vcom driver on Your computer
- disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- set connection like below image (option/connection)
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too
- from drop down Select ‘Download only‘
- Click ‘Download’
- turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Method 2 (No Auth):
- Install MTK & usbdk driver on your pc
- Run rom2box Go to Mediatek/firmware flasher & open dedicated GUI
- connect phone in BROM Mod (you have to do test Point)
- once Phone detected in tool go to partition manager and locate all Partition file one by one from ROM folder
- once Ready, Click ‘write partition‘
- once done, disconnect device, reconnect once charging started disconnect & Power ON
Read also: