Oppo A1x PHJ110 Firmware Stock ROM (Flash File)

The term Stock Firmware refer to the version of the operating system that the device’s manufacture pre-installs. It is the original firmware that comes with a device and can be used to return it to its default settings.

Oppo A1x PHJ110 Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.

Pre-Requirement’s

  • make a complete backup before process
  • charge the device to prevent accidental shut down
Must Require:

Disclaimer:

  • flashing May brick your Phone, flash at own risk
Firmware Information:
Device Name: Oppo A1x PHJ110
ROM Type: Full ROM
SoC: Mediatek
OS: Android 13xx
Password: Null
Root Access: No
Region: Check Below List
Firmware Version: Check Below List

Downloads Links:

Available ROMs:

Flash tools:

  • Oplus Download tool: Download
  • Contact Me for oplus tool Login, unbrick, FRP, Reset, Region Change & root (paid)

usb driver: 

How to Install Stock Firmware on Oppo A1x PHJ110:

  1. Download & Unpack the ROM File & Oplus Download Tool: download latest version of oplus download tool & stock edl firmware, once downloaded extract the firmware and tool
  2. Install Oplus Driver: Download & Install the latest Oplus driver on your computer. This ensures seamless communication between your device and the computer during the firmware installation.
  3. Launch Oplus Download Tool: open tool folder and run Download-tool.exe on your computer.
  4. Login Oplus tool: Log in oplus tool using your Oppo ID credentials to proceed with the firmware installation.
  5. Locate Firmware (ofp) File or Directory: Identify the firmware file (ofp) or directory where it is stored. Make sure to select the correct file for your device.
  6. Initiate the Firmware Installation: Click on the “Start” button to ‘Start’ the firmware installation process.
  7. Connect Phone to Computer: Connect your device to the computer using the following pattern: Volume Up + Volume Down + USB cable. If your device is not recognized, perform a test point to establish the connection.
  8. Wait until Success: allow the installation process to unfold. Be patient and wait until you receive a success confirmation soon.
  9. Completion and Device Unplugging: Once the installation is successfully completed, disconnect your device from the computer. it will start automatically.

How to Install recovery ROM:

you can sideload Via stock recovery or local update

  • adb sideload 'filename'

Flashing Recovery ROM via Fastboot:

  • extract update rom (payload.bin) using payload dumper go
  • use fastboot flash in this format
fastboot flash 'partition name' 'filename'