Download Stock Firmware for OnePlus Nord 2T:
Official Stock Firmware Now available for the OnePlus Nord 2T and You can download it from below. by using this firmware you can solve all software Issues with in your OnePlus Nord 2T such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
OnePlus Nord 2T Run on Android 12 & it is Powered by Mediatek dimensity 1300 Processor. it is a dual SIM smartphone support nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 8GB of RAM & 128GB of Storage that can be expandable via SD card.
Pre-Requirement’s
- first make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- disable auth/SLA by following this Guide
- The firmware is for repairing purpose only, you have to manage risk accordingly
Firmware Information: |
|
---|---|
Device Name | OnePlus Nord 2T |
ROM Type | Full ROM + update |
SoC | Mediatek |
OS | Android 12 |
Password | Null |
Gapps | Included |
Root Access | No |
Region | IN, GLO |
Firmware Version | OxygenOS |
Download Links:
Available Firmware:
OFP Packages:
- CPH2399GDPR_11_14.0.0.605EX01
- Contact Me for unbrick, frp, reset & Region change ( not free)
How to Install EDL Firmware on OnePlus Nord 2T:
- unpack downloaded Firmware (ofp) using this tool
- Install Mediatek VCOM driver on Your computer
- disable SLA Authentication by using this tool (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract SP tools on your computer
- from the flash tool folder Run flash_tool.exe
- set the connection like below image (option/connection)
- Go to Download tab Click Scatter and load scatter file from ROM folder
- Select ‘Download only’
- Click ‘Download’
- connect Your switched off Phone to computer by using usb cable (press Volume up and down key + Insert usb) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
using ROM2box:
- move all partition images to single folder
- Run ROM2box.exe
- Go to Mediatek/Firmware Flasher
- Select ‘All Partition‘ Option, Locate Firmware folder
- Click ‘Flash’ button
- Once the process Started, turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- once finished
- disconnect device
- again connect device once charging started unplug and Switch it ON
Note: if any issue like ‘file Not found’ then change file format from .img to .bin that all you have to do.
How to Install OTA update:
- reboot phone to recovery
- wipe cache
- click install update, locate file & click Install
Read also:
have any issue, Let me know via comment