OnePlus 7 Pro Flash File Firmware unbrick tool Free Download:
Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the firmware that is distributed with a device and can be used to restore it to its original state.
OnePlus 7 Pro Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. stock ROMs are often specific to a particular device and are not interchangeable between different devices.
Pre-Requirement’s
- make a complete backup before process
- charge the device to prevent accidental shut down
Must Require:
Disclaimer:
- flashing May brick your Phone, flash at own risk
Firmware Information: |
|
---|---|
Device Name: | OnePlus 7 Pro |
ROM Type: | Full ROM |
SoC: | Qualcomm |
OS: | Android |
Password: | Null |
Root Access: | No |
Region: | Check Below List |
Firmware Version: | Check Below List |
Downloads Links:
- Oxygen OS 11.0.5.1 EU MSM: Download
- Oxygen OS 11.0.5.1 GLO MSM: Download
- Oxygen OS 10.3.8 GLO : Download
- Hydrogen OS 11.0.4.1 : Download
- Hydrogen OS 11.0.6.1 MSM : Download
- Oxygen OS 9.5.16 Sprint MSM : Download
- Oxygen OS 9.5.10 T-Mobile MSM : Download
OTA’s
Flash tools:
- MSM Download tool: Mirror
- Contact me for MSM tool Login, unbrick, FRP, Reset, Region Change & root (paid)
usb Driver:
- QCOM 9008 EDL driver: Download
How to Install Stock Firmware on OnePlus 7 Pro:
- Extract ROM File & tool in same folder
- Install QCOM 9008 usb driver on your computer
- run MSM Download tool
- select other & login
- locate firmware ofp file
- connect Phone to computer followed by this Pattern > volume up + volume down + USB cable, if no device then you have to do test point..
- Click START.
- wait until success,
- once done. unplug device and switch it ON.
How to Install recovery ROM:
you can sideload via stock recovery or use Oneplus local updater
-
adb sideload 'filename'
Flashing Recovery ROM via Fastboot:
- extract update rom (payload.bin) using payload dumper go
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'