OnePlus 11 CPH2451 Flash File Free Download:
The term “Stock ROM” or “Firmware” describes the version of the operating system that the device’s creator pre-installs. It is the original firmware that comes with a device and can be used to return it to its default settings.
OnePlus 11 CPH2451 Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.
Pre-Requirement’s
- make a complete backup before process
- charge the device to prevent accidental shut down
Must Require:
Disclaimer:
- flashing May brick your Phone, flash at own risk
Firmware Information: |
|
---|---|
Device Name: | OnePlus 11 CPH2451 |
ROM Type: | Full ROM |
SoC: | QCOM SD 8Gen2 |
OS: | Android 13 |
Password: | Null |
Root Access: | No |
Region: | Check Below List |
Firmware Version: | Check Below List |
Downloads Links:
OFP Packages:
- CPH2451export_11_A.21_2023060606000148: Download
- CPH2451export_11_A.06_2023010723390000: Download
- 9008 EDL unbrick tool/ MSM tool Patched
OTA Packages:
Flash tools:
- MSM Download tool: Mirror
- contact me for MSM tool Login, unbrick, FRP, Reset, Region Change & root (paid)
usb Driver:
- QCOM 9008 EDL driver: Download
How to Install Stock Firmware on OnePlus 11 CPH2451:
SLA Enable device, you have to use official MSM download tool with a authorized oppo account.. or fastboot with unlocked bootloader
- Extract ROM File & tool in same folder
- Install oppo driver on your computer
- run Oplus Download tool
- Login with Oppo ID
- locate firmware ofp file or dir
- Click start .
- Connect Phone to computer followed by this Pattern > Volume up + Volume down + USB cable, if no device then you have to do test point..
- Wait until Success,
- once done. unplug device and switch it ON.
How to Install recovery ROM:
you can sideload via stock recovery or use Oneplus local updater
-
adb sideload 'filename'
Flashing Recovery ROM via Fastboot:
- extract update rom (payload.bin) using payload dumper go
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'