Download Stock Firmware/Flash File Motorola One:
Download Official Stock Firmware Flash File For Motorola One. If you have Motorola One Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.
In Some cases We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your Motorola One lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Motorola One.
Motorola One Smartphone is Run on Android 8.1 Which is Powered by a QCOM Snapdragon 625 Processor. the Motorola One is a Single SIM (GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include, Bluetooth,, USB OTG, FM, and 4G.
The Motorola One Smartphone is Come with 4GB of RAM and 64GB of Storage can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s:
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Motorola One
Type: Full ROM
ROM Size: up to 3 GB
SoC: QCOM SD 625
Os: Android 8.1
Password: null
Gapps: Included
Root access: Not
Firmware Version: XT1941-3_DEEN_8.1.0_OPKS28.63-18-3_cid50_subsidy-DEFAULT_regulatory-XT1941-3_CFC.xml.zip
Download:
Flash Tools:
- MOTO RSD Lite tool Here
Driver:
- QD Loader Driver Here
How to Install Stock Firmware Flash Motorola One:
- Download & extract Firmware.zip
- After extracting You will see an XML file “VZW” then open the file with notepad. Remove all lines with the word “getvar” there were two lines that have the word “getvar”, then save.
- Open RSD Lite, Press the “…” next to the Filename. Find and select the XML file that has been edited in step No.2.Your phone must be on the AP fastBoot Mode.
- Reboot Phone to fastboot Mod and Connect to PC
- Make Sure QD Loader Driver Installed otherwise it Not Work.
- Click Download/Start
- wait until Flashing Complete. Then unplug Phone and Switch it on
Have any issue Follow Detailed Guide With images Below
Read also: