Leotec LETAB1020 Flash File Firmware MT8167 9.0

Download Stock Firmware for Leotec LETAB1020:

Official Stock Firmware Flash File Now available for the Leotec LETAB1020 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. This firmware will solve all software Issues on your Leotec LETAB1020 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Leotec LETAB1020 Run on Android 9.0 and it is Powered by Mediatek MT8167 Processor. connectivity features Include, hotspot, WIFI, GPS, Bluetooth etc. The device come with 2GB of RAM and 32GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of Board Software

Pre-Requirement’s

  • backup NVRAM using this Guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Leotec LETAB1020
Type: Full ROM
Size: up to 986MB
SoC: Mediatek MT8167
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: below

Download Links:

  • VCOM Driver: Download
  • SP Flash tools V5.2: Download
  • Firmware Leotec LETAB1020 Valid For Serial Number lsnq1116xxxx-lsnq1216xxxx-lsnq0217xxxx-y-lsnq0517xxxx: Download
  • Firmware Leotec LETAB1020 Valid for Serial Number lnsq0518xxxx-lnsq0718xxxx: Download

How to Install Stock Firmware on Leotec LETAB1020:

  • Extract downloaded stock firmware..
  • Install Mediatek VCOM driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & Connect Your switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:

have any issue, Let me know via comment


LEAVE A REPLY

Please enter your comment!
Please enter your name here

5 × 4 =