Lenovo TB-X606XA Firmware Flash File MT6762 9.0

Download Stock Firmware for Lenovo TB-X606XA:

Official Stock Firmware Flash File Now available for the Lenovo TB-X606XA & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software Issues on your Lenovo TB-X606XA such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Lenovo TB-X606XA Run on Android 9.0 and it is Powered by Mediatek MT6762 Processor.  connectivity features Include 3G hotspot, GPS, WIFI, Bluetooth. The device come with 2/3GB of RAM and 32GB/64GB of storage that can be expandable Via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of Board Software

Pre-Requirement’s

  • backup NVRAM using this Guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Lenovo TB-X606XA
Type: Full ROM
Size: up to 2.2GB
SoC: Mediatek
Os: Android
Password: Null
Root access: Not
Gapps: Included
Firmware Version: TB-X606XA_S300539_220217_BMP

Download Links:

File Name Version Downloads
VCOM Driver N/A Download
SP Flash tools V5.2 Download
Firmware /Flash File TB-X606XA_S300539_220217_BMP Download

How to Install Stock Firmware on Lenovo TB-X606XA:

  • Extract downloaded Stock firmware..
  • Install Mediatek VCOM driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & connect Your switched off Phone by pressing volume up & down key.

  • You can see Flashing Process on screen. after complete unplug & switch it On
Read also:

have any issue, Let me know via comment