Download official Firmware (Stock ROM) for itel A510W:
Official Stock Firmware Now available for the itel A510W & You can download it from below. by using this firmware you can solve all software Issues with in your itel A510W such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
itel A510W Run on Android 11 and it is Powered by Mediatek MT6580 Processor. it is a dual SIM smartphone support nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 1/2GB of RAM & 16/32GB of Storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- disable auth by following this Guide
- The firmware is for Repairing purpose only, You have to manage risk accordingly
Firmware Information:
Device Name: itel A510W
Type: Full ROM
Size: up to 1.1GB
SoC: Mediatek
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: A510W-A332-11-OP-V019-20220510
Download Links:
How to Install Stock Firmware on itel A510W:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download
- connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
Read also:
have any issue, Let me know via comment