Download Stock Firmware Flash File for Invens Max 8:
Official Stock Firmware/ Flash File Now available for the Invens Max 8 & You can download it from below. by using this firmware you can solve all software Issues with in your Invens Max 8 such as hang logo, Factory Data Reset lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Must Require:
Why We Need Stock Firmware?
- to downgrade a device
- to upgrade a device
- Fix some serious issue in device
- Remove Factory Data Reset, Pattern and Pin lock
- fix bootloop and software issue on a device
- completely Re-Installation of board software
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Invens Max 8
Type: Full ROM
Size: up to 574MB
SoC: Mediatek
Os: Android 9.0
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Invens_Max_8_MT6580_V01_191022_9.0
Download Links:
How to Install Stock Firmware on Invens Max 8:
- Extract Downloaded firmware
- Install Mediatek VCOM driver on Your computer
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
- flashing Process started. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
- How to Repair Device Network ID (Baseband) Number
- Google camera 6.1 working HDR Plus Portrait Mod Slow Motion
have any issue, Let me know via comment