Download Infinix Note 5 X604 Android 10 Firmware Flash File

Download Stock Firmware for Infinix Note 5 X604:

Official Stock Firmware Flash File Now available for the Infinix Note 5 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software issues with in your Infinix Note 5 such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Infinix Note 5 Run on Android 8.1 and it is Powered by Mediatek MT6739 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI and Bluetooth.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of Board Software

Pre-Requirement’s:

  • backup NVRAM using this Guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Infinix Note 5
Type: Full ROM
Size: up to 1.5GB
SoC: Mediatek MT6763
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: X604-H633H-Q-210122V365

Download Links:

How to Install Stock Firmware on Infinix Note 5:

  • Extract downloaded Stock firmware..
  • Install Mediatek VCOM driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & connect Your switched off Phone by pressing volume up & down key.

  • You can see Flashing Process on screen. after complete unplug & switch it ON

How to Flash using Tecno Flash tool:

  • Download & Extract Firmware
  • Download & Extract tecno flash tool
  • Install Mediatek VCOM driver on Computer
  • open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
  • click on grey ‘Settings icon’ on the top-Left corner of the screen.
  • In the Popup Click load & Select  MT6XX_Android_scatter.txt File From Firmware Folder
  • Connect Your Switched of phone to Computer by Pressing volume up & down Key
  • Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar

  • Once done, flashing bar will turn Green, now disconnect your phone from your computer & switch it on.
Read also:

have any issue, Let me know via comment


2 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here

18 − seventeen =