How to Install 9.0.1.6 Firmware update on Huawei P10 Plus

9.0.1.6 official Firmware update For Huawei P10 Plus:

Download & Install 9.0.1.6 official Firmware update For Huawei P10 Plus. if you own Huawei P10 Plus Smartphone then You Can Download Latest Firmware update For it. 9.0.1.6 Firmware update For Huawei P10 Plus available for all it’s users via The OTA So You Can Check For update From about_Phone/System_update Section . if you have not Yet Receive it then You can Download it From the below.

9.0.1.6 Firmware update For the Huawei P10 Plus Come EMUI 9.0 based on Latest android 9.0 Pie with Latest Google Security Patches. A Complete Changelog File also attached with the Firmware You Can Check it before Download.

The Huawei P10 Plus Smartphone is Run on Android 7.0 OS Which is Powered by Kirin 960 Processor. The Device Come with the 4/6GB of RAM and 64/128GB of Storage.

Note-


1.Must Create a backup of Your ROM and Personal data.
2.it will Erase all your Data Include Personal information.
3. Not tested by Me do at own Risk
4.Make Sure Your Phone Have at least 40-50% Charge to Prevent accidental Shut Down.
5. Method 3 is best. dload Method only for MM Devices with SD card update. Method 1& 2 are optional.

Firmware Information-

  • Device: Huawei P10 Plus
  • Model No: VKY-L09
  • Android OS: 9.0
  • Version: 9.0.1.6
  • EMUI: 9.XX
  • Firmware:N/A
  • Status: Official
  • Type: Full firmware image
  • Size : up to 2 GB

Download-

Tools:

VKY-L09-CUSTC02B6 (9.0.1.6)

Changelog:

  • Complete Changelog
  • EMUI 9.0. Built on Android Pie, this Version preserves that essential Android flavor, with a twist of nature and simplicity.
  • Intuitive design
    We’ve simplified the UI in EMUI 9.0, making it easier and more intuitive to use.

How to Install official Firmware update on Huawei P10 Plus:

  • Download HiSuit From Here
  • Set the DNS address 81.177.139.39 in Your network connection.
  • Connect the phone with PC With  HiSuite Running, wait until it Installs the mobile application and join the phone.
  • In HiSuite, Click “Update” and agree to Install the update found. Then Cancel the Installation, go to the folder C: \ Users \% username% \ Documents \ HiSuite \ ROM . Replace files with the extension “.zip.dbk” with pre-downloaded firmware files ( update.zip, update_full_ * .zip, update_data_full_public.zip ).
  • Again, Click “Update” and see that the firmware is loaded 100%, after which the download will Start on the Phone.
  • Restoring the DNS settings to the original value, since during the update authentication, an error like “Server is not available” is possible.
  • When the firmware is downloaded – the phone will reboot and start the installation

Method 2 With twrp:

  • Download update Package From above
  • Download HuRupdater.zip and Move it to Device Storage along with update file.
  • Make Sure all Files (Like  full, public, and update zip) available in Same Folder
  • Reboot Phone to twrp Recovery. Go to backup and Create a nandroid backup
  • Go to Install and Install HURupdater.zip. Done Reboot system Now.
  • if the Phone is not bootup Then Flash no verity opt Encrypt.zip. Done

More Method:

  • Some More Installation Method Here