Huawei Mediapad T3 8.0 Stock Firmware:
Download Mediapad T3 8.0 official Stock Service Firmware Flash File For Repair, Here we Share Complete Firmware image which is used to repair [unbrick] Huawei Mediapad T3 8.0. You can Download and Flash it using the Below Guide.
When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel Your Huawei Mediapad T3 8.0.. lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on Your Huawei Mediapad T3 8.0.. Please not that use this Firmware only on a Dead or bootloped Device.
Note-
1. This Guide is Work on Listed Devices only. So Please Don’t try on any other phone.
2. Flashing The ROM by Flash tools Will Erase all your Data. So create a backup of your Personal data before Flashing.
3. Please Do carefully, We are not Responsible for any damage bootloop or Dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Switch off.
5. Must backup NVRAM using this Guide before Doing anything.
Must Require:
1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup
Requirement’s:
Firmware:
How to unbrick Huawei Mediapad T3 8.0:
- First of Download and Extract the Firmware Package From the above
- Run Huawei update Extractor Go to Setting and and Disable header Check [Must Require]
- Now Go back and Extract Update.app
- Now you will Get System.img , boot.img and Some Other Files.
- Move system.img and boot.img File From This folder to adb tools Folder
- Now reboot Phone Phone to bootloader and Connect to PC with usb
Open CMD and type below code’s
fastboot flash boot boot.img fastboot flash system system.img fastboot reboot
Note: if you have Dead or Locked Huawei Phone then Final Solution Here
Done/ Your Phone Now unbricked. have any question Let us Know via Comment.