How to Install Stock Firmware on Evercoss Xtream 2 Pro

Download official Firmware/Flash File Evercoss Xtream 2 Pro:

Download Official Stock Firmware Flash File For Evercoss Xtream 2 Pro. If you own Evercoss Xtream 2 Pro Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Evercoss Xtream 2 Pro lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on Your Evercoss Xtream 2 Pro.

The Evercoss Xtream 2 Pro Run on android 8.1 OS Which is Powered by  Spreadtrum Processor. it is a Dual SIM Smartphone that accept 2 Regular GSM SIM Card, Connectivity Option’s Include 3G GPS, Wi Fi, Bluetooth etc. Sensor include Goryo Proximity Gravity etc.

The Device Come with 1GB of RAM and 16GB of Storage Can be expandable Via SD card.in Camera Department it Come With 5MP Rear Camera With 2MP Front Shooter.

Note-

1. Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.

Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Firmware Information-

Product Name: Evercoss Xtream 2 Pro
Type: Full ROM
ROM Size: up to 1.5GB
SoC: Spreadtrum
Os: Android 8.1
Password: null
Gapps: Included
Root access: Not
Version: EVERCOSS_M55B_V12_8.1_22032019

Download :
  •  Firmware Evercoss Xtream 2 Pro: Download
Flash Tools:
  • SPD flash tools R19 Here
Driver:

How to Install Stock Firmware on Evercoss Xtream 2 Pro:

    1. Download and Install SPD Driver From above
    2. Download and Extract ROM File and Flash tools From above
    3. Run Flash tools and Click Load Package.
    4. Now Select Pac file from the Downloaded ROM folder
    5. Click Download and Connect Your Switched off Phone.
    6. Done/

have any issue Here is a Detailed Guide with Images: Here

Check other articles-