Download official Firmware (Stock ROM) for Doogee S95:
Official Stock Firmware Now available for the Doogee S95 & You can download it from below. by using this firmware you can solve all software Issues with in your Doogee S95 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Doogee S95 Run on Android 9.0 and it is Powered by Mediatek helio P90 Processor. it is a dual SIM smartphone support nano SIM card, connectivity features Include hotspot, GPS, WIFI and bluetooth. the device come with 6GB of RAM & 128 GB storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- (optional) disable auth by following this Guide
- The firmware is for Repairing purpose only, You have to manage risk accordingly
Firmware Information:
Device Name: Doogee S95
Type: Full ROM
Size: up to 3-4GB
SoC: Mediatek
Os: Android 12
Password: Null
Gapps: Included
Root access: Not
Firmware Version:
s900A_DG_M10_a1_256G8G_128G6G_fhdp_BOM5_p0_cts_DOOGEE-S95-Android9.0-20200103_user_20200104
Download Links:
How to Install Stock Firmware on Doogee S95:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only.
- Click Download
- connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
Read also:
have any issue, Let me know via comment