Cubot Note 20 Pro Flash File Firmware MT6771 10.0

Download Stock Firmware for Cubot Note 20 Pro:

Official Stock Firmware Flash File Now available for the Cubot Note 20 Pro & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box.

Cubot Note 20 Pro Run on Android 10 & it is Powered by Mediatek MT6771 Processor. it is a dual SIM (GSM) Smartphone that support Nano-SIM card. connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G.

Must Require:

Why We Need Stock Firmware?

  • to Downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s

  • backup Your NVRAM using this Guide
  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Cubot Note 20 Pro
Type: Full ROM
Size: up to 1.7GB
SoC: Mediatek MT6771
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: CUBOT_NOTE 20 PRO_A013C_V06_20200902

Download Links:

File NameVersionDownloads
VCOM DriverN/ADownload
SP Flash toolsV5.2Download
Firmware/ Flash FileCUBOT_NOTE 20 PRO_A013C_V06_20200902Download

How to Install Stock Firmware Cubot Note 20 Pro:

  • Extract Downloaded Stock Firmware..
  • Install Mediatek Vcom driver on Your PC.
  • Download & Extract SP Flash tools, Run SP Flash tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download Only. Click Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.


LEAVE A REPLY

Please enter your comment!
Please enter your name here

eighteen + eight =