Download Stock Firmware for Casper VIA E3:
Official Stock Firmware Flash File Now available for the Casper VIA E3 & You can download it from below. by using this firmware you can solve all software Issues on your Casper VIA E3 such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Casper VIA E3 Run on Android 9.0 and it is Powered by Mediatek MT6761 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, Bluetooth 3G & 4G. The device come with 2GB of RAM and 32GB of Storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Casper VIA E3
Type: Full ROM
Size: up to 2GB
SoC: Mediatek MT6761
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: MT6761_EMMC_PPR1_180610_011__9_VIA_E3_Casper_2020_06_15_19_24
Download Links:
How to Install Stock Firmware on Casper VIA E3:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & connect Your switched off Phone by pressing volume up & down key.
- You can see Flashing Process on screen. after complete unplug & switch it On
Read also:
have any issue, Let me know via comment