Blackview BV6600 Pro Firmware Flash File MT6765 11.0

Download Stock Firmware Flash File for Blackview BV6600 Pro:

Official Stock Firmware Flash File Now available for the Blackview BV6600 Pro & You can download it from below. by using this firmware you can solve all software Issues on your Blackview BV6600 Pro such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Blackview BV6600 Pro Run on Android 11 and it is Powered by Mediatek MT6765 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, bluetooth 3G & 4G. The device come with 4GB of RAM and 64GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • backup NVRAM using this guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Blackview BV6600 Pro
Type: Full ROM
Size: up to 1.73GB
SoC: Mediatek MT6765
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version:
21-08-12 zn128g-dk024p-BV6600Pro-64-64g4g-hdp-a3-bom11-r0-cts-EU-dk_BV6600Pro_EEA_ZN128G_V1.0_20210811V12_20210812

Download Links:

How to Install Stock Firmware on Blackview BV6600 Pro:

  • Extract Downloaded firmware.
  • Install Mediatek VCOM driver on Your computer.
  • Download & extract smartphone Flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)

  • flashing Process Started. once done, unplug device & switch it ON

Note: if there is no USB device then you have to check for USB driver or try test Point

Read also:

have any issue, Let me know via comment


LEAVE A REPLY

Please enter your comment!
Please enter your name here

10 − 10 =