If your Oppo Reno 14 China PLA110 is stuck on the boot logo, showing software errors, experiencing lag, or locked with FRP, installing the official stock firmware can help recover it to factory condition. This ROM is provided by the manufacturer and is designed specifically for the Oppo Reno 14 China PLA110, ensuring stability and performance.
Follow the instructions below carefully to flash the firmware safely. This guide works for both soft-bricked devices and general software recovery.
Important Notes
- Back up all important data before proceeding — flashing will erase everything.
- Use firmware made for your exact model: Oppo Reno 14 China PLA110.
- Flashing the wrong ROM can lead to bootloop or bricking.
- Follow the steps carefully. Improper flashing may damage your device.
Download Links
- PLA110_15.0.2.231(CN01)_OTA
- Oplus USB Driver: Download
- Oplus Download Tool: Download
- Contact Me for unbrick, frp, reset, region change & root
How to Flash Stock Firmware on Oppo Reno 14 China PLA110
- Download and extract the firmware ZIP document to your computer.
- Install Oplus USB drivers on your PC.
- Download and extract the Oplus Download Tool.
- Launch the utility and log in with a service account (if required).
- Click Import and choose the extracted firmware directory.
- Click the START button in the utility.
- Power off the phone, then press and hold both Volume Up + Down buttons.
- While holding the buttons, connect your device to the PC via USB.
- Wait for the utility to detect and flash your phone automatically.
Alternative: Install OTA Firmware
If your phone boots into recovery, you can also sideload OTA firmware manually:
adb sideload firmware.zip