MaxWest Nitro 7Q Firmware Flash File SC7731e 10.0

Download official Firmware/Flash File for MaxWest Nitro 7Q:

official stock Firmware Now available for the MaxWest Nitro 7Q & You can download it from below. by using this firmware you can solve all software Issues with in your MaxWest Nitro 7Q such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc. MaxWest Nitro 7Q Run on Android 10 and it is Powered by Spreadtrum SC7731e Processor. connectivity Option’s Include, GPS, Wi-Fi, hotspot, bluetooth etc.

Pre-Requirement’s

  • make a complete backup of your device
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: MaxWest Nitro 7Q
Type: Full ROM
ROM Size: up to 2-4GB
SoC: SC7731e
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version:
MAXWEST_Nitro_Phablet_7Q_sp7731e_1h10__s7067e_1g_20201114

Download Links:

How to Install Stock Firmware on MaxWest Nitro 7Q:

    1. Download and Install SPD Driver on your computer
    2. Download and Extract Firmware File and Flash tools
    3. Run SPD Flash tool and Click load Package
    4. Now Select Pac file from the downloaded ROM folder
    5. Click Download and connect Your switched off Phone to computer using usb cable (USB + Power up and down key) (make sure all driver’s are Installed properly)
    6. wait unit success, once done disconnect device and Switch it ON

Check other articles: