unbrick is a process to repair a device that was bricked, with in Motorola G41 user face two type of brick- soft brick and hard brick.
Soft brick: in this stage device stuck or freez on boot logo or animation due to any software/ firmware issue.
hard brick: in this stage device completely goes dead and does not show any sign of boot for example logo or animation, even fastboot or recovery mod.
so if your Motorola G41 having any of soft or hard brick issue then you can fix it by following the below Instructions.
Requirement’s
- Laptop, PC
- Mediatek USB driver: Download
- unbrick file for Motorola G41: Download
- fastboot Firmware for Motorola G41: XT2167-2/
Steps to unbrick Motorola G41:
- Download & extract fastboot firmware
- download & Extract unbrick file for Motorola G41
- Install Mediatek VCOM USB driver on your computer
- Install adb fastboot driver on your computer
- Now connect your phone to computer by Pressing volume up & down key (if device not detected in Mediatek VCOM then you have to do test point/ short test point)
- Open unbrick file folder and Run blank-flash.bat, wait until success, once done, your phone rebooted in fastboot mod
- open fastboot firmware folder and Run flash_all.bat, wait until success, your Phone successfully rebooted, done.
have any question Let Me know Via comment.