Download Stock Firmware Flash File for SunWind SKY 7 E200:
Official Stock Firmware Flash File Now available for the SunWind SKY 7 E200 & You can download it from below. by using this firmware you can solve all software Issues on your SunWind SKY 7 E200 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
SunWind SKY 7 E200 Run on Android 10 & it is Powered by Mediatek MT8321 Processor. The device come with 2GB of RAM and 16GB of Storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue with in Phone
- completely Re-Installation of board software
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: SunWind SKY 7 E200
Type: Full ROM
Size: up to 813MB
SoC: Mediatek MT8321
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Sky_7_e200_st7230mg_rev1_factory_20201021
Download Links:
How to Install Stock Firmware on SunWind SKY 7 E200:
- Extract downloaded stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to PC by Pressing volume up & down key.
- You can see flashing Process on screen. after complete unplug & switch it ON’
Read also:
have any issue, Let me know via comment