CPH2043 oppo Reno 3 Flash File Firmware Free Download:
Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the firmware that is distributed with a device and can be used to restore it to its original state.
Oppo Reno 3 Run on Android 10 & it is Powered by Mediatek MT6885 Processor. it is a dual SIM (GSM and GSM) Smartphone support Nano-SIM cards. connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM 3G & 4G. The device come with 8GB of RAM and 128GB of Storage that can be expandable via SD card.
Note:
- it will erase all Your Personal data Including Internal storage. so we advice you to first Make a complete backup of your Phone.
- Please do carefully, we are Not responsible for any damage to Your device.
- ensure that Your device at-least 50% charge to Prevent accidental shut down.
Must Require:
Firmware Information-
Device Name: Oppo Reno 3
Type: Full ROM
ROM Size: up to 7 GB
SoC: Mediatek MT6885
Os: Android
Password: Null
Gapps: Included
Root access: Not
Firmware version: CPH2043_11_C.17_202103171547
Downloads Links:
Firmware File:
Flash tools:
- oppo Download tool: Download
- SP Flash tool V5.21: Download
- Miracle Box (Optional): Download
- Contact Me for oplus tool Login, unbrick, FRP, Reset, Region Change & root (paid)
usb Driver:
How to Install Stock Firmware on Oppo Reno 3:
- unpack downloaded Firmware using this tool
- then disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Install Mediatek Vcom driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- select download only. Click Download & Connect Your switched off Phone.
- You can see flashing Process on screen. after complete unplug & switch it on
How to Flash/unbrick Oppo Reno 3 Via Oppo Download tool:
- Extract ROM File & Download tool in same Folder
- Now Install correct driver on PC
- connect Phone to PC with USB
- Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.
Related: