Realme 2 RMX1805 Firmware Flash File (Stock ROM)

Realme 2 RMX1805 Flash File Free Download:

Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the firmware that is distributed with a device and can be used to restore it to its original state.

Realme 2 RMX1805 Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. stock ROMs are often specific to a particular device and are not interchangeable between different devices.

Pre-Requirement’s

  • make a complete backup before process
  • charge the device to prevent accidental shut down
Must Require:

Disclaimer:

  • flashing May brick your Phone, flash at own risk
Firmware Information:
Device Name: Realme 2 RMX1805
ROM Type: Full ROM
SoC: Qualcomm
OS: Android
Password: Null
Root Access: No
Region: Check Below List
Firmware Version: Check Below List

Downloads Links:

Flash tools:

  • MSM Download tool: Mirror
  • Contact Me for MSM tool Login, unbrick, FRP, Reset, Region Change & root (paid)

usb driver: 

How to Install Stock Firmware on Realme 2 RMX1805:

SLA Enable device, you have to use official Oplus download tool with a authorized oppo account.. or fastboot with unlocked bootloader

  • Extract ROM File & tool in same folder
  • Install qualcomm usb driver on your computer
  • run Oplus Download tool
  • Login with Oppo ID
  • locate firmware ofp file
  • Click start .
  • Connect Phone to computer followed by this Pattern > Volume up + Volume down + USB cable, if no device then you have to do test point..
  • Wait until Success,
  • once done. unplug device and switch it ON.

How to Install recovery ROM:

you can sideload via stock recovery or use Oneplus local updater

  • adb sideload 'filename'

Flashing Recovery ROM via Fastboot:

  • extract update rom (payload.bin) using payload dumper go
  • use fastboot flash in this format
fastboot flash 'partition name' 'filename'